MachinesFräsen

Tekwell Maximart MX - B5S

Machine lamp, coolant device, spindle infinitely variable, feed infinitely variable

MONDIALE VIKING 1MA

automatic feed and rapid traverse in cross-motion, Condition: little run, very good

WALDRICH- COBURG 15-21 FP 200/300

General overhaul mechanically and electrically in 2007, new Siemens servo motors and new main spindle motors (3 pcs.),chip conveyor right / left, 2 shifts, gear and spindle were overhauled at the beginning of 2020 with 2 spindles, magnetic plate 1500 x 2040 mm can be taken over optionally, gear stages 10-110 U / min., 90-250 U / min., 200-600 U / min., 1 x milling head vertically with damage to the gear unit and converter, machine can be viewed under power

WANDERER 2 G/E

horizontal milling machine, nice well maintained machine, shading image on the guides very well preserved, spindle runs very quietly, control version G 210, handwheels on swivel arms

SPINNER U5-620

5-axis machine, rotary / tilting table mounted on both sides, rotary table Ø 650 mm, blow-out device for spindle cone, direct measuring systems in all axes, auto option. Kinematics measurement using touch probe cycles

Wissner WiTec 6020 Performance

4 axis, very well maintained machine, to 95 % plastic was processed

SPINNER MVC 850

Well-maintained machine, rarely used, only one-off production in the training workshop, options: memory expansion to 1 GB; processing of part programs directly from the ATA card memory

STAMA MC 531 single

Rotating / swiveling device, workpiece slide

STAMA MC 325

4th axis, rotary axis NC 160 mm, horizontal table

DECKEL FP 4A NC

less operating hours, can be inspected under power

POS POSmill C 1050

Machine like new, 3-axis (4th and 5th axis prepared),internal cooling, air cooling

KEKEISEN UFF 6000

direct measuring systems, all axes stable sliding guides with approx. 10 m / min. Feed, table-level integrated rotary table d = 1,400 mm n <= 8 rpm, hydraulically clamped, rotary table can be manually moved as a W axis approx. 500 mm away from the machine in order to be able to turn parts up to Ø 2.40 0 mm. Orthogonal head with serration B + C axis, thus 4 axes simultaneously and 2 axes adjusted = 6 axes, machine switches automatically between 1st and 2nd gear from 1,000 rpm, internal cooling 70bar with paper belt filter 2,000 liters, internal air cooling, chip conveyor, partial housing Special feature: Operation possible from the moving control panel or standing in front of the machine (see photo) i.e. program while the machine is running Control cabinet with 2 coolers, all drives converted to Siemens, approx. 50 t machine weight (bed with stand and table are separated),milling head, headstock, slide, headstock, storage completely revised for biscuits with all bevel gear sets 03/2018 for € 67,000 Gearbox completely repaired by Kekeisen 05/2019 for 12T € all invoices for repairs available, approx. 4 pieces DIN A4 folders / manuals available   Available from approx. September 2020, the machine is in two shifts

BURKHARDT + WEBER MC 60 HV BAZ

Bulleri Beta 6

Milling motor power 4 kW, vacuum pump 25 m³ / h, very good condition, immediately ready for use, servo motors in the axes, has run less than single-shift

MAZAK MT V 550 B

single shift operation

HÜLLER HILLE nb-h 90

very good condition, was never in production, few working hours

Kunzmann UF 8/3 CNC

ready for operation

DECKEL FP5 NC

MAZAK VQC-20/50

HERMLE UWF 720

under power, ready for inspection